Reflective Color Sensor Assembly OPB780Z


The OPB780Z color sensor uses a light-to-frequency converter that combines 64 configurable silicon photodiodes, with a white LED in a small, lightweight package that makes it ideal for using in miniature applications. The output of the device is designed to drive a standard TTL or CMOS logic input over short distances.

 

Tube Liquid Sensor OPB350 Series

The OPB350 series liquid sensor is designed to work with 1/16” [1.6mm] 1/8” [3.2mm], 3/16” [4.8 mm] and 1/4” [6.3 mm] outside diameter clear tubes. When output reference circuitry is added, multiple output states such as “fluid present,” “no fluid present” and “no tube present” can be recognized.
Clear liquid present causes the phototransistor to sink the maximum current, while dark liquid present causes it to sink the minimum current. As bubbles pass through the tube, the signal will vary between the “liquid present” and “no liquid” states. If no tube is present, the phototransistor sinks current between the dark fluid and clear Fluid states. The customer will have to identify the typical current values for each situation.

Long Distance Reflective Switch
OPB720A and OPB720B Series

The OPB720A and OPB720B Series reflective switches detects objects as far away as 12” (305 mm) using standard 90% reflective material, and can detect objects as small as 0.08” (2 mm). The OPB720 series consist of three standard reflective switching distances -06Z for typically 6” (152 mm), -12Z for typically 12” (305 mm) and -30VZ for typically 30” (762 mm). The power supply voltage range of the OPB720A series is 10 to 30 volts while the power supply voltage range for the OPB720B is 4 to 7 volts.

The OPA720A and OPB720B sensors are NOT affected by ambient light in most conditions. Ambient light conditions are compensated by using a synchronous driver detection scheme.

Infrared Light Emitting Diode OP250, OP251

Features:
• High power GaAIAs
• 1206 miniature SMD package style
• 880 nm wavelength
• Choice of narrow or tight beam angle
• Mechanically and spectrally matched to OP520 series phototransistors

Each OP250 and OP251 device is a GaAIAs infrared LED, mounted in a miniature SMT 1206 size chip carrier that is compatible with most automated mounting equipment. The OP250 has a flat molded lens that enables a wide beam angle and provides an even emission pattern. The OP251 has an internal molded lens that enables a tight beam angle and provides an even emission pattern.