"Constant
Current" LED Drivers Provide High Output Current
(up to 700mA), very wide input (7:1) and high efficiency (up to 96%)
 |
The new drivers offer a
wide input range of 5 -36VDC and 7-30VDC. They also provide output
current accuracy of up to ±2% - thus ensuring the constant color and
brightness that is required by today's most demanding LED applications.
The DIP24 package (31.80 × 20.30 × 10.20 mm) produces up to 22.5 watts
of power. A DIP24 package (20.32 x 10.16 x 6.88 mm) or compact DIP14 is
also available. Each one includes a remote ON/OFF control function, as
well as PWM and analog voltage dimming control (0 - 100%).
|
Boasting efficiencies as high as 96%, Aimtec’s LED drivers are designed to be as reliable as the LEDs they drive, allowing them to be used at an operating temperature of -40oC to +85oC at full load.
Aimtec’s LED drivers are ideal for either single unit or arrays of LEDs for lighting applications that include advertising displays, road and rail traffic signs and signals, exterior and interior lighting for automotive, consumer products and a wide range of industrial products, including telecommunication applications.
While both series are competitive priced, the AMLD-IZ series provides an exceptional quality/cost ratio with pricing that is significantly less than the competition. Samples for both series are immediately available from stock.
NOTE:1.
1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified.5..Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 5. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet.