Compact 1W DC-DC Converter With Ultra High I/O Isolation of 6000 VDC and Isolation Barrier of 2.5mm
Aimtec Inc. strengthens its 1 watt product offering with the launch of the AM1DC-Z series of DC-DC converters providing ultra high I/O isolation of 6000 VDC with an isolation barrier of 2.5mm, providing supplemental isolation.

Input voltages of 5, 12 and 24 VDC converts to single and dual output voltages of (±)3.3, (±) 5, (±)9, (±)12 and (±)15 VDC with continuous short circuit protection.  Operating at efficiencies as high as 79% within an ambient temperature range of -40C to +71C at full load or up to +85C with derating, the AM1DC-Z  series is well suited for both indoor and outdoor industrial applications including motor control, test and measurement. 

Designed in a compact SIP7 package (19.56 x 9.90 x 12.45mm), the AM1DC-Z ‘s I/O isolation barrier (2.5mm) meets the specifications outlined in the IEC 60950-1:2001 safety standard ITE (rated for 250VAC working voltage), allowing these converters to be used in a multitude of space critical applications.

Made with high quality, RoHS compliant materials that undergo rigorous quality control to ensure reliability and performance, the AM1DC-Z  series is competitively with samples available from stock for immediately delivery.

 
AM1DC-Z
DC-DC Encapsulated Series
Wattage1 
Input voltage5, 12, 24 
Output voltage-15, -12, -9, -5, -3.3, 3.3, 5, 9, 12, 15 
Output TypeSingle, Dual 
PackageSIP7 
Isolation6000  
Temp (°C)-40°C to +70°C 
Status:
 New - RoHS Compliant


 

Input Specifications

Parameters

Nominal

Typical

Maximum

Units

Voltage range

5 12 24

4.5-5.5 10.8-13.2 21.6-26.4

 

VDC

Filter

Capacitor

 

 

Turn on Transient process time

5 Vin 12 Vin 24 Vin

760 300 280

 

µs

Start up time

5 Vin 12 Vin 24 Vin

2.8 2.3 2.24

 

ms

Absolute Maximum Rating

5 Vin 12 Vin 24 Vin

0-7 0-15 0-28

 

VDC

Peak Input Voltage time

 

 

100

ms

Quiescent Current

5 Vin 12 Vin 24 Vin

30-40 20 10-15

 

mA

Rise time

5 Vin 12 Vin 24 Vin

180 200 180

 

µs

Input Reflected Ripple current

Thru 12µH inductor, 5Hz to 20MHz

20

 

mA rms

 

Isolation Specifications

Parameters

Conditions

Typical

Maximum

Units

Tested I/O voltage (rated for 1 min)

Flash tested for 3sec.

6000

 

VDC

Rated working voltage

 

250

 

V rms

Resistance 

 

>1000

 

MOhm

Capacitance

 

10

 

pF

 

Output Specifications

Parameters

Conditions

Typical

Maximum

Units

Voltage accuracy

 

±3

 

%

Voltage balance (Dual output model)

Balanced Load

±1

 

%

Short Circuit protection

 

Continuous

 

 

Short circuit restart

 

Auto recovery

 

 

Line voltage regulation

For 1% change of V in

±1.2

 

%

Load voltage regulation

From 10 to 100% load

±10

 

%

Temperature coefficient

 

±0.03

 

%/oC

Maximum Capacitive load

Single output models Dual output models

 

220 ±100

µF

 

General Specifications

Parameters

Conditions

Typical

Maximum

 

Units

Switching frequency 

100% load

See models table

 

 

KHz

Clearance Distance

Input to Output

2.5

 

 

mm

Operating temperature

Full Load without Derating

-40 to +70

 

oC

Storage temperature

 

-40 to +125

 

oC

Maximum case temperature

 

 

100

 

oC

Cooling

Free air convection

 

Humidity

 

 

95

 

% RH

Case material

Non-conductive black plastic, epoxy encapsulated (UL94V-0 rated)

 

Soldering temperature

1.5mm from case for 10 sec.

 

260

 

oC

Weight

4.2

 

g

Dimensions (L x W x H)

0.77 x 0.39 x 0.47 inches      19.56 x 9.80 x 12.00 mm

 

MTBF

>2 390 000 hrs (MIL-HDBK-217 F at +25 oC)

 

NOTE: All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified.

NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified.5..Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 5. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet.

AIMTEC

ILLUMINATED HOMEPAGE