Edison Opto Expands Its Product Portfolio With The New, Linear Type LED, Ediline III

Through continuous model advancement, Edison Opto has introduced EdiLine III for enhanced adaptability and robustness.

EdiLine III is available in two types of packaging – 1W and 3.5W. The 1W device is measured at 41.25 x 4.0 x 0.8mm, with luminous flux of 100 lumens at cool white; while the 3W device is measured at 95.6 x 5.6 x 0.8mm with luminous flux of 330 lumens at cool white (CCT: 5,000~10,000K).

 

Features
-Linear Packaging Design
-High Efficiency
-Low Power Consumption
-Long Operating Lifespan
-Easy installation with screws

The linear structure design of EdiLine III results in an easier heat dissipation requirement, making versatile fixtures design possible as well as an overall cost saving benefit. EdiLine III is the ideal substitute for various lighting applications, such as fluorescent lamp, table lamp, desk light, commercial, and indirect illumination or decorative lighting application.

1.Please refer to ANSI C78.377 binning
2.Cool white: 5,000K~10,000K; Neutral White: 3,800K~5,000K; Warm White: 2,670K~3,800K
3.Subject to change without prior notice. Please refer to the official datasheet.


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Edison Opto Introduces EDIS Module for High Bay Applications
Featuring ultra-high-power EdiStar emitters, the circular EDIS module integrates thermal, electrical, mechanical and optical aspects to deliver a total LED lighting solution. Depending on the application, EDIS modules are now available in 50W and 100W, with three CCT options at Cool White, Neutral White and Warm White for each.

The ultra-high power 100W EdiStar emitters offer 7,000lm, equivalent to the brightness of 400W mercury lamp with less energy consumption - as much as 70. The EDIS module is especially ideal for high-bay applications, such as industrial or warehouse lighting where fixture installments are 6 to 8 meters above ground. The module not only offers savings through energy cost but also reduces the maintenance cost for replacement.
 
The water-dust protection level for the module is rated at IP65, which can be applied in both indoor & outdoor applications.


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Edison Opto introduces IP67 Waterproofed LED Modules

Edison Opto, a Taiwan based high power LED packaging company, recently introduced IP65 waterproofed LED modules, enhancing outdoor application versatility and durability.

These modules include IP67 linear lightbars that are suitable for outdoor decorative lighting as well as architectural contour lighting. The newly announced IP67 linear lightbar ranges in length from 30, 45, 60, 90 and 120cm. It is available in warm white, neutral white, cool white as well as RGB variation.

Besides the linear module, Edison Opto further extended their portfolio with a new IP65 (waterproofed) Ultra-High Power-EDIS series - which features 50W or 100W EdiStar emitters.